Automatic Footwear leather shoe upper edge gluing shoemaking machine

Automatic Footwear leather shoe upper edge gluing shoemaking machine

Product introduction

1. The water-based glue can be used, make full usage of the glue, Meet the requirements of European and American countries, do not contain benzene.

2. The glue will not be dried sealed 3 month in the glue barrel.

3. Special design 180 degree rotation, in different position in working and not working.

4. Applied in shoe industry, leather making industry, such as handbag, notebook cover, file cover, leather belt etc

5. Easy to operate, easy to clean

Technical parameters

Voltage:220V

Power:1/8HP

Features:

1. The main feature of this glue machine is that the glue will not be dried within 3 month in the glue barrel. 

2. Special design 180 degree rotation, the working position and not working position is different.

Preparation before working

1. To check if the screw is well locked

2. To check if the power is AC220V

3. To check if the speed adjustment is return-to-zero

4. To make sure all the above is confirmed.

Operation instruction

1. Turn the body to vertical and then lock the handle

2. Get the glue barrel off and fill with glue

3. Adjust the width of the working area

4. Adjust the height based on the material thickness

5. Turn "ON", adjust the speed after the power on.

6. Put the material on the working area to glue, and check the thickness of glue after trial glue, adjust the glue handle to proper glue usage.

7. When stop work, turn the body upside down to make the glue come into the glue barrel to make sure that the glue will not be dry.

8. Before re-work, using white oil to wipe the wheel, then turn the hand-turn screw, when it loose, then turn the glue barrel into vertical position, turn on the power, start to work.

9. Check the ammeter frequently, if the fuse need to be changed, do not exceed 3A.

10. If the material to be glued is thin and soft (0.3mm), adjust the Baffle